Sahara Moto

Sahara Moto is a high-speed tire pressure management solution designed for all motorsports *tube and tubeless tires. (Increase tubeless tire amount by 25% in tube type tires). Sahara Moto will self balance tires, protect the tire casing from heat and oxidation damage, seal bead/ rim leaks and self repair punctures up to 1/2″ (1.2CM)  in diameter. Sahara Moto is the only high-speed gel formula with the highest operating temperature.

*CAUTION: It is highly recommended to apply Sahara Moto in new tubes only, because the old tubes may contain contaminated water or other ballast/sealant liquids that will interfere with the performance of Sahara Moto. Not to be used as a puncture repair in tubes or pinched tubes.

Operates between -58°F to 370°F ( -50°C – 188°C)


  • Balances tire and wheel assembly.
  • Stops air loss and retains correct tire pressure by sealing the entire casing from casing porosity.
  • Continually self-seals punctures up to 1/2″ in diameter.
  • Protects tire casing from heat and oxidation damage.
  • Stops Bead/Rim leaks.
  • Dissipates tire chamber heat so that tires run cooler.
  • Does not pool at the bottom or block the valve system.
  • Does not interfere with Retreading. Will not cause chamber fires in a retread plant. Test results available upon request.
  • Aluminum alloys vary by manufacture. Check your wheel manufacturer’s warranty concerning the use of tire sealants before installing Stallion Products.


  • Operates between -58°F to 370°F ( -50°C – 188°C)
  • Added safety for used and recapped tires.
  • Approved for use with TPMS.
  • Helps retain casing integrity.
  • Washes out easily with water.
  • Non-Hazardous.
  • Non-Flammable.
  • Biodegradable.
  • Non-Toxic.

Testing the New Best Motorcycle Tire Sealant…